PSP Practice Test (Part-3b)

Which type of training includes understanding various cultures, dealing with disabled persons and practicing safety compliance?

Affective learning.

Correct Incorrect Correct answer

Cognitive learning.

Correct Incorrect Correct answer

Psychomotor learning.

Correct Incorrect Correct answer

Radicle learning.

Correct Incorrect Correct answer

Which of the following is not a concern of Security officer at Patrol?

Suspicious persons, vehicles, or circumstances

Correct Incorrect Correct answer

Equipment operating at the wrong time.

Correct Incorrect Correct answer

Problems with fire-fighting equipment

Correct Incorrect Correct answer

Fire alarm controls.

Correct Incorrect Correct answer

Which of the following is instruction concerning access control for security officers?

Check identification

Correct Incorrect Correct answer

Record keeping

Correct Incorrect Correct answer

Inspection of fire exits

Correct Incorrect Correct answer

Inspection of security and fire exposures

Correct Incorrect Correct answer

Which of the following is not a function of security officer?

Patrol of buildings and perimeters

Correct Incorrect Correct answer

Inspection of security and fire exposures

Correct Incorrect Correct answer

Coordinating with senior management

Correct Incorrect Correct answer

Emergency response

Correct Incorrect Correct answer

In determining which structure is appropriate, organizations should consider several elements. Proprietary security officer programs may offer the following advantage

Less direct control of personnel selection.

Correct Incorrect Correct answer

Training, and supervision.

Correct Incorrect Correct answer

Integrate personnel selection

Correct Incorrect Correct answer

Sense of employee loyalty to the organization being protected.

Correct Incorrect Correct answer

The following are few considerations to determining security officer model/structure (proprietor, contract, or hybrid ) is appropriate. Which one is incorrect?

The type of organization to be protected.

Correct Incorrect Correct answer

Its location or locations

Correct Incorrect Correct answer

Organizations goals

Correct Incorrect Correct answer

Organizations margins

Correct Incorrect Correct answer

Which of the following is not a component of wireless Communication?

Transmitter

Correct Incorrect Correct answer

Receiver

Correct Incorrect Correct answer

Source

Correct Incorrect Correct answer

Power for the transmitter and receiver

Correct Incorrect Correct answer

Which one of the following is a characteristic of Optical fiber?

Less sensitive to fluctuations in the power source

Correct Incorrect Correct answer

Carry any electrical current

Correct Incorrect Correct answer

Radiate signals

Correct Incorrect Correct answer

Vulnerable to interception by acoustical or inductive coupling.

Correct Incorrect Correct answer

Optical fiber is not affected by the following energy

Electromagnetic interference (EMI)

Correct Incorrect Correct answer

Kinetic Energy (KE)

Correct Incorrect Correct answer

Static energy (SE)

Correct Incorrect Correct answer

Gravitational Energy (GE)

Correct Incorrect Correct answer

Resistance varies ______ with the length of the line and ______with the diameter of the wire in Wire and Cable Communications.

Indirectly, equally

Correct Incorrect Correct answer

Indirectly, inversely.

Correct Incorrect Correct answer

Directly, inversely.

Correct Incorrect Correct answer

Equally, directly

Correct Incorrect Correct answer

To send information professionals can use the communication medias, the communications media of choice is the following

Telephone

Correct Incorrect Correct answer

GPS

Correct Incorrect Correct answer

Video

Correct Incorrect Correct answer

Data transfer

Correct Incorrect Correct answer

What is the use of Alarm Communication and Display(AC&D) sub system?

Moves data from the sensor to a central repository.

Correct Incorrect Correct answer

Moves data from equipment to controller.

Correct Incorrect Correct answer

Extract data from sensor and send to recorder

Correct Incorrect Correct answer

Capture data from camera and send to the central system.

Correct Incorrect Correct answer

Which one of the following is not a characteristics of a Alarm communication systems?

Quantity of alarm data

Correct Incorrect Correct answer

High reliability

Correct Incorrect Correct answer

Speed

Correct Incorrect Correct answer

Design

Correct Incorrect Correct answer

Which type of Lens can be used when the required view is a narrow area at long range?

Wide-angle lens.

Correct Incorrect Correct answer

Standard lens.

Correct Incorrect Correct answer

Telephoto lens.

Correct Incorrect Correct answer

Zoom lens.

Correct Incorrect Correct answer

What are the three main types of lenses in security?

Fixed lens, focal lens and zoom lens.

Correct Incorrect Correct answer

Fixed lens, varifocal lens and zoom lens.

Correct Incorrect Correct answer

Zoom lens, movable lens and wide angle lens.

Correct Incorrect Correct answer

Zoom lens, Standard lens and short angle lens.

Correct Incorrect Correct answer

The maximum length of a twisted-pair cable for Ethernet is normally______.

328 ft. (100 m).

Correct Incorrect Correct answer

350 ft. (106 m).

Correct Incorrect Correct answer

351 ft. (107 m).

Correct Incorrect Correct answer

358 ft. (109 m).

Correct Incorrect Correct answer

What is Electronic shuttering?

An internal video-amplifying system that works to maintain the video signal at a specific level as the amount of available light decreases.

Correct Incorrect Correct answer

Common tool for controlling the brightness of an image focused onto a chip is the auto-iris lens.

Correct Incorrect Correct answer

Obviates the need for auto-iris lenses

Correct Incorrect Correct answer

A camera's ability to compensate for light changes without the use of automatic or manual iris lenses.

Correct Incorrect Correct answer

Which of the following is not a theoretical identification view of digital imaging?

Monitor.

Correct Incorrect Correct answer

Observe.

Correct Incorrect Correct answer

Design.

Correct Incorrect Correct answer

Subject identification.

Correct Incorrect Correct answer

What is the definition of resolution?

Critical measure of the picture quality, specifically the number of horizontal scan lines.

Correct Incorrect Correct answer

Critical measure of the video quality, specifically the number of vertical scan lines.

Correct Incorrect Correct answer

Pixels is equal to horizontal scan lines

Correct Incorrect Correct answer

Critical measure of the video quality, specifically the number of horizontal beam lines.

Correct Incorrect Correct answer

What are the 3 basic sensitivities in cameras?

Full light, lower light, and low light.

Correct Incorrect Correct answer

Full light, medium light, and low light.

Correct Incorrect Correct answer

Full light, Camera light and low light.

Correct Incorrect Correct answer

Low light, medium light and beam light.

Correct Incorrect Correct answer

What is sensitivity?

The minimum amount of light required by the camera to produce an video.

Correct Incorrect Correct answer

The minimum amount of light required by the camera to produce an image.

Correct Incorrect Correct answer

The minimum amount of reflection required by the camera to produce an output.

Correct Incorrect Correct answer

The minimum amount of light required by the monitor to produce an output.

Correct Incorrect Correct answer

What is the use of Transmission cable in Analog video system ?

Used to transmit the electrical signal from the camera to the monitor

Correct Incorrect Correct answer

Used to transmit the reflective video signal from the camera to the recorder.

Correct Incorrect Correct answer

Used to transmit the reflective video signal from the monitor to the recorder.

Correct Incorrect Correct answer

Used to transmit the electronic video signal from the camera to the monitor.

Correct Incorrect Correct answer

What is the use of Camera in Analog video system ?

Used to transform a electrical light image into an electronic signal

Correct Incorrect Correct answer

Receives signal from source and give it to the controller.

Correct Incorrect Correct answer

Used to transform a reflected light image into an electronic signal.

Correct Incorrect Correct answer

Used to reflect original light and transfer to recorder.

Correct Incorrect Correct answer

What is the ratio of all analog video surveillance system monitors and cameras?

3:1

Correct Incorrect Correct answer

3:2

Correct Incorrect Correct answer

2:1

Correct Incorrect Correct answer

4:2

Correct Incorrect Correct answer

What is the most common measurement of the quality or detail in an analog image?

Horizontal resolution

Correct Incorrect Correct answer

Vertical resolution.

Correct Incorrect Correct answer

Vertical sweep line.

Correct Incorrect Correct answer

Horizontal sweep line.

Correct Incorrect Correct answer

What are the 3 factors of Camera Functional requirements?

Target, view and activity.

Correct Incorrect Correct answer

Target, activity and point of line.

Correct Incorrect Correct answer

Target, activity and purpose.

Correct Incorrect Correct answer

Target, view and purpose.

Correct Incorrect Correct answer

In video surveillance, What is the use of a monitor?

Records and selects which images to record.

Correct Incorrect Correct answer

Used to control what video is viewed.

Correct Incorrect Correct answer

Display one or more video images.

Correct Incorrect Correct answer

Generates signal from camera and gives to the equipment.

Correct Incorrect Correct answer

What are the main elements of a video surveillance system?

Lens, Camera and Transmission medium.

Correct Incorrect Correct answer

Monitor, GPS and lens.

Correct Incorrect Correct answer

Pixels, Control equipment and Camera.

Correct Incorrect Correct answer

Video recorder, Lens and network system.

Correct Incorrect Correct answer

Video surveillance is primarily used to do the following

Determine the clarity and size of the field of view.

Correct Incorrect Correct answer

Convert the optical image provided by the lens.

Correct Incorrect Correct answer

Detect activities that call for a security response.

Correct Incorrect Correct answer

Generate signal from the camera.

Correct Incorrect Correct answer

What is the use of Sensor components and subsystems?

High probability of detection,

Correct Incorrect Correct answer

High nuisance alarm rate.

Correct Incorrect Correct answer

High vulnerability to the defined threat.

Correct Incorrect Correct answer

Adequate protection to the building.

Correct Incorrect Correct answer

Which of the following is not a characteristics of Bistatic Microwave Sensors?

Visible

Correct Incorrect Correct answer

Line-of-sight

Correct Incorrect Correct answer

Freestanding sensors

Correct Incorrect Correct answer

Passive

Correct Incorrect Correct answer

The detection volume cross-section of a multiple-beam IR sensor is typically___wide and____ high.

5 cm, 1.8 m.

Correct Incorrect Correct answer

4 cm, 1.7 m.

Correct Incorrect Correct answer

6 cm, 1.9 m.

Correct Incorrect Correct answer

7 cm, 2.8 m.

Correct Incorrect Correct answer

The sensitivity of Electric field sensors can be adjusted to extend up to_____ beyond the wire or plane of wires.

4 ft. (1.21 m)

Correct Incorrect Correct answer

5 ft. (1.5 m)

Correct Incorrect Correct answer

3 ft. (0.9 m)

Correct Incorrect Correct answer

3.3 ft. (1 m)

Correct Incorrect Correct answer

Which of the following is not a characteristics of Electric field or capacitance Sensor?

Visible

Correct Incorrect Correct answer

Terrain-following sensors

Correct Incorrect Correct answer

Active

Correct Incorrect Correct answer

Sensitivity

Correct Incorrect Correct answer

Which of the following is not a characteristic of Sensor fence?

Active

Correct Incorrect Correct answer

Passive

Correct Incorrect Correct answer

Terrain-following sensors

Correct Incorrect Correct answer

Visible

Correct Incorrect Correct answer

Which one of the following is not a Active transfer?

Radar

Correct Incorrect Correct answer

GPS

Correct Incorrect Correct answer

Sonar

Correct Incorrect Correct answer

Thermal infrared

Correct Incorrect Correct answer

Which of the following satellite maintains a fixed position at a normal altitude of 22,300 miles above the earth’s surface?

Low Earth orbit

Correct Incorrect Correct answer

Medium Earth orbit

Correct Incorrect Correct answer

Geostationary Earth orbit

Correct Incorrect Correct answer

Moon orbit

Correct Incorrect Correct answer

Which of the following is widely used in law enforcement and the military for locating hidden explosives and drugs?

Mass spectrometer

Correct Incorrect Correct answer

Chemiluminescence detectors

Correct Incorrect Correct answer

Canine olfaction

Correct Incorrect Correct answer

Ion mobility spectrometer

Correct Incorrect Correct answer

Which of the following determines the cause of the alarm and decides whether the response is needed?

Alarm analysis

Correct Incorrect Correct answer

Alarm synthesis

Correct Incorrect Correct answer

Alarm assessment

Correct Incorrect Correct answer

Mechanical lock

Correct Incorrect Correct answer

Which of the following is a general way to defeat the system?

Generating an alarm

Correct Incorrect Correct answer

Alarm rates

Correct Incorrect Correct answer

Bypass or Spoof

Correct Incorrect Correct answer

Deviation

Correct Incorrect Correct answer

The following one can help users judge the quality and appropriateness of sensors from various manufacturers

Operating Conditions

Correct Incorrect Correct answer

Standards

Correct Incorrect Correct answer

Security measures

Correct Incorrect Correct answer

Finance

Correct Incorrect Correct answer

The following are components of a full-featured electronic access control system. Which one is incorrect?

Supplementary interfaces to external systems

Correct Incorrect Correct answer

Credential reader

Correct Incorrect Correct answer

Software

Correct Incorrect Correct answer

Path analysis

Correct Incorrect Correct answer

The verification decision in personnel access control is usually based on which one of the following?

whether the person is carrying a valid credential

Correct Incorrect Correct answer

whether the person knows a valid personal identification number

Correct Incorrect Correct answer

both a and b

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

Methods of personnel entry authorization include the following systems. Which one is incorrect?

personal identification number

Correct Incorrect Correct answer

credentials

Correct Incorrect Correct answer

bio-metrics

Correct Incorrect Correct answer

video badges

Correct Incorrect Correct answer

Personnel access control is the portion of an access control system used to _______ and ______ of personnel seeking entry to a controlled area.

authorized entry, verify the authorization

Correct Incorrect Correct answer

unauthorized entry, identity verification

Correct Incorrect Correct answer

combine access control, effective protection

Correct Incorrect Correct answer

keycard access, security control

Correct Incorrect Correct answer

The following access is widely used in retail trade to identify products at the point of sale, is sometimes used on coded credentials

Proximity badge

Correct Incorrect Correct answer

Magnetic stripe

Correct Incorrect Correct answer

Bar code

Correct Incorrect Correct answer

NFC stands for:

National Field Communication

Correct Incorrect Correct answer

Near Field Communication

Correct Incorrect Correct answer

No Field Communication

Correct Incorrect Correct answer

National Fuel Community

Correct Incorrect Correct answer

The _______ is the magnetic intensity of an applied field required to change the information.

Coercivity

Correct Incorrect Correct answer

Magnetism

Correct Incorrect Correct answer

Electromagnetism

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

Which of the following material is relatively easy to erase?

300 oersted magnetic material

Correct Incorrect Correct answer

2500 oersted magnetic material

Correct Incorrect Correct answer

4500 oersted magnetic material

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

These techniques is not available for coding a badge

Magnetic stripe encoding

Correct Incorrect Correct answer

Barcodes

Correct Incorrect Correct answer

Smart app

Correct Incorrect Correct answer

Smart cards

Correct Incorrect Correct answer

Which one of the following techniques available for coding a badge?

Magnetic stripe

Correct Incorrect Correct answer

Wiegand wire

Correct Incorrect Correct answer

Proximity

Correct Incorrect Correct answer

All of the above

Correct Incorrect Correct answer

Which of the following badge is contains a specific code that is usually fixed at the time of manufacture and cannot be changed?

Write only

Correct Incorrect Correct answer

Read/ write

Correct Incorrect Correct answer

Read only

Correct Incorrect Correct answer

Video only

Correct Incorrect Correct answer

Low-frequency badges are in the following range

60 kHz

Correct Incorrect Correct answer

100 kHz

Correct Incorrect Correct answer

125 kHz

Correct Incorrect Correct answer

600 kHz

Correct Incorrect Correct answer

Which of the following can be included in a true smart card that makes the card smart and sets it apart from a memory card?

Nano meter

Correct Incorrect Correct answer

Microprocessor

Correct Incorrect Correct answer

Smart chip

Correct Incorrect Correct answer

Receiver

Correct Incorrect Correct answer

Which of the badge verification system requires that matching batches be held at each access control point?

Stored image system

Correct Incorrect Correct answer

Identification system

Correct Incorrect Correct answer

Exchange system

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

This badge requires a manual check by a guard with a high degree of vigilance

Name badge

Correct Incorrect Correct answer

Store image badge

Correct Incorrect Correct answer

Coded credentials

Correct Incorrect Correct answer

Text badge

Correct Incorrect Correct answer

Which one of the following is a drawback of using Photo Identification badge?

It can be made or an individual can make up his or her face to match the face on a stolen badge

Correct Incorrect Correct answer

Guard inattentiveness can increase its effectiveness

Correct Incorrect Correct answer

Security control

Correct Incorrect Correct answer

Management in publicity department

Correct Incorrect Correct answer

Which of the following is a print direct on credential function and may require overlays to protect images from UV and scratches?

Dye sublimation printing

Correct Incorrect Correct answer

Overlays

Correct Incorrect Correct answer

Bulk card printing

Correct Incorrect Correct answer

Path analysis

Correct Incorrect Correct answer

Which one of the following may be custom and include holograms or other difficult-to-duplicate features?

Bulk card printing

Correct Incorrect Correct answer

Dye sublimation printing

Correct Incorrect Correct answer

Overlays

Correct Incorrect Correct answer

Onboard encoding

Correct Incorrect Correct answer

The following features may be included in Printers for the ID cards printing

Bulk card printing

Correct Incorrect Correct answer

Dye sublimating printing

Correct Incorrect Correct answer

Overlays

Correct Incorrect Correct answer

All of the above

Correct Incorrect Correct answer

Which of one the following refers to a capability of the maximum number of images that can be stored by the system?

Storage

Correct Incorrect Correct answer

Enrollment

Correct Incorrect Correct answer

Access

Correct Incorrect Correct answer

Finance

Correct Incorrect Correct answer

Components of a full-featured electronic access control system include which of the following?

Credential reader

Correct Incorrect Correct answer

Cabling wires

Correct Incorrect Correct answer

Hardware

Correct Incorrect Correct answer

Finance

Correct Incorrect Correct answer

A comprehensive access control system is designed to do which of the following?

Permit only authorized persons and vehicles to enter and exit

Correct Incorrect Correct answer

Delay the entry of people

Correct Incorrect Correct answer

Maintain personal space

Correct Incorrect Correct answer

Provide a better understanding of margins

Correct Incorrect Correct answer

The balance between effective access controls and the following one is likely to create challenges for Personnel Access Control

Information system

Correct Incorrect Correct answer

life safety

Correct Incorrect Correct answer

Facilities

Correct Incorrect Correct answer

Threats

Correct Incorrect Correct answer

A comprehensive access control system is not designed to do which of the following?

Permit only authorized persons and vehicles to enter and exit

Correct Incorrect Correct answer

Detect and prevent the entry of contraband material

Correct Incorrect Correct answer

Detect and prevent the unauthorized removal of assets

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

A _______ vault is a specially designed, weatherproof, fixed box containing essential keys to the facility.

Rapid entry key

Correct Incorrect Correct answer

Credential operated locks

Correct Incorrect Correct answer

Combination lock

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

Which one of the following types of credentials are not used in personnel access control?

Photo identification badges

Correct Incorrect Correct answer

Exchange badges

Correct Incorrect Correct answer

Metal detectors

Correct Incorrect Correct answer

Code credentials

Correct Incorrect Correct answer

ICBO stands for :

International Council of Building Officials

Correct Incorrect Correct answer

International Code of Building Officials

Correct Incorrect Correct answer

International Council of Basic Officer

Correct Incorrect Correct answer

International Council of Building Orders

Correct Incorrect Correct answer

Magnetic locks are rated by the pounds of force required to separate the armature or strike plate from the electromagnet, ranging from :

100 to 200 lb

Correct Incorrect Correct answer

500 to 2,000 lb

Correct Incorrect Correct answer

400 to 500 lb

Correct Incorrect Correct answer

None of the above

Correct Incorrect Correct answer

Electromagnetic locks are useful on doors that are architecturally significant and where mechanical latching must be coordinated with safety codes. Electromagnetic locks are intrinsically ______ because the removal of power releases the strike plate.

Fail safe

Correct Incorrect Correct answer

Fail secure

Correct Incorrect Correct answer

Fail soft

Correct Incorrect Correct answer

Secure

Correct Incorrect Correct answer

These locks allow doors to be locked and unlocked by a remote device

Electrified locks

Correct Incorrect Correct answer

Dial combination lock

Correct Incorrect Correct answer

Wafer tumbler lock

Correct Incorrect Correct answer

Mechanical lock

Correct Incorrect Correct answer

Which one of the following is the principal of Master keying?

Single lock may be operated by more than one key by designing various keys to engage or work on different tumblers or different aspects of the same tumblers

Correct Incorrect Correct answer

Works on electrical principle

Correct Incorrect Correct answer

Develops security

Correct Incorrect Correct answer

Manage security control

Correct Incorrect Correct answer

Which of the following is a type of mechanical lock?

Warded lock

Correct Incorrect Correct answer

Mechanical lock

Correct Incorrect Correct answer

Electric lock

Correct Incorrect Correct answer

Tumbler array

Correct Incorrect Correct answer

The following lock is probably the most widely used lock in the United States for application such as exterior and interior building doors

Pin tumbler lock

Correct Incorrect Correct answer

Level lock

Correct Incorrect Correct answer

Warded lock

Correct Incorrect Correct answer

Mechanical lock

Correct Incorrect Correct answer

Locks can be divided into which of the following general class?

Those that operate on purely mechanical principles

Correct Incorrect Correct answer

Those that combine magnetic energy with mechanical operations and are commonly associated with access system

Correct Incorrect Correct answer

Those that operate on magnetic energy with a computer system

Correct Incorrect Correct answer

Purely lightning system

Correct Incorrect Correct answer

_______ enable emergency responders to enter a facility when no one is able to provide access.

Combination systems

Correct Incorrect Correct answer

Credential system

Correct Incorrect Correct answer

Rapid entry systems

Correct Incorrect Correct answer

Exit system

Correct Incorrect Correct answer

Which of the following detection is typically performed with point sensors, searching for evidence of an attack at the site perimeter?

Chemical and physical agent

Correct Incorrect Correct answer

Chemical and biological agent

Correct Incorrect Correct answer

Electric and biological agent

Correct Incorrect Correct answer

Mechanical agent.

Correct Incorrect Correct answer

Which of the following is the process of detecting a person or vehicle attempting to gain unauthorized entry into an area?

Alarm assessment

Correct Incorrect Correct answer

Access control

Correct Incorrect Correct answer

Intrusion detection

Correct Incorrect Correct answer

Network diagrams

Correct Incorrect Correct answer

Which of the following is used in intrusion detection systems?

Exterior and interior membrane sensor

Correct Incorrect Correct answer

Video alarm assessment

Correct Incorrect Correct answer

Access Deniable membrane

Correct Incorrect Correct answer

Sensor meter

Correct Incorrect Correct answer

Units for indoor use should be capable of operating in a temperature range from:

120° F to 150° F

Correct Incorrect Correct answer

0° F to 30° F

Correct Incorrect Correct answer

32° F to 120° F

Correct Incorrect Correct answer

150° F to 200° F

Correct Incorrect Correct answer

Sensors can be categorized into the following application groups. Which one is incorrect?

Buried line

Correct Incorrect Correct answer

Fence-associated

Correct Incorrect Correct answer

Free standing

Correct Incorrect Correct answer

Path obstructer

Correct Incorrect Correct answer

The following sensors are examples of exterior sensors. Which one is incorrect?

Passive or active

Correct Incorrect Correct answer

Covert or visible

Correct Incorrect Correct answer

Volumetric or line detection

Correct Incorrect Correct answer

Electrochemical sensor

Correct Incorrect Correct answer

Which of the following sensor does transmit energy and detect changes to it?

Passive

Correct Incorrect Correct answer

Active

Correct Incorrect Correct answer

Application

Correct Incorrect Correct answer

Membrane

Correct Incorrect Correct answer

Which of the following describes how passive sensors work?

Detect energy emitted by the object of interest

Correct Incorrect Correct answer

Detect a target caused the change in a natural power

Correct Incorrect Correct answer

Transmit energy and detect changes in the received energy

Correct Incorrect Correct answer

Transfer power from a source to storage

Correct Incorrect Correct answer

Active sensors typically contain both ____ and a _____.

Sensor, Emitter

Correct Incorrect Correct answer

Transmitter, Receiver

Correct Incorrect Correct answer

Frequency, Signals

Correct Incorrect Correct answer

Senso meter, Signals

Correct Incorrect Correct answer

The transducers are require a force of approximately_______ on the wire to cause an alarm.

28 lb. (12.7 kg)

Correct Incorrect Correct answer

30 lb. (13.6 kg)

Correct Incorrect Correct answer

24 lb. (10.8 kg)

Correct Incorrect Correct answer

25 lb. (11.3 kg)

Correct Incorrect Correct answer

The following sensor generates an alarm when an intruder enters the detection volume

line of sight

Correct Incorrect Correct answer

volumetric

Correct Incorrect Correct answer

covert

Correct Incorrect Correct answer

membrane

Correct Incorrect Correct answer

Which of the following coaxial cables could be used to carry a digital video signal via specialized signal modification equipment?

RG – 58/U

Correct Incorrect Correct answer

RG – 7/U

Correct Incorrect Correct answer

RG – 11/V

Correct Incorrect Correct answer

RG – 11/U

Correct Incorrect Correct answer

Optical fibers can be used to carry the following

Voice-grade signals

Correct Incorrect Correct answer

Audio frequency signals

Correct Incorrect Correct answer

Audio signals

Correct Incorrect Correct answer

Data

Correct Incorrect Correct answer

Which of the following can be used to carry voice-grade signals, video signals, and digital or data-grade signals?

Ethernet

Correct Incorrect Correct answer

Optical fiber

Correct Incorrect Correct answer

coaxial

Correct Incorrect Correct answer

Alarm transmission

Correct Incorrect Correct answer

Which of the following is a technique for transmitting several messages simultaneously on the same medium?

Point to point

Correct Incorrect Correct answer

Loop

Correct Incorrect Correct answer

Multiplexing

Correct Incorrect Correct answer

Entry to Exit

Correct Incorrect Correct answer

Alarm signals may be transmitted on either or shielded or unshielded pair of ____________________ conductors.

Direct current

Correct Incorrect Correct answer

Alternating current

Correct Incorrect Correct answer

Indirect current

Correct Incorrect Correct answer

Frequency

Correct Incorrect Correct answer

Which of the following is needed for wireless communication?

A transmitter to furnish radio frequency energy

Correct Incorrect Correct answer

An antenna to radiate the energy into the atmosphere

Correct Incorrect Correct answer

A receiver

Correct Incorrect Correct answer

All of the above

Correct Incorrect Correct answer

Devices are installed on a pair of wires that have been looped throughout an area, a building, or a facility, and then connected to a control center. It is called:

Point to point

Correct Incorrect Correct answer

Loop

Correct Incorrect Correct answer

Multiplex

Correct Incorrect Correct answer

Wireless

Correct Incorrect Correct answer

The U.S. Department of Labor forecasts that between 2012 and 2022, the employment of security officers will grow by ____ percent, about as fast as the average of all occupations.

23

Correct Incorrect Correct answer

45

Correct Incorrect Correct answer

12

Correct Incorrect Correct answer

55

Correct Incorrect Correct answer

There are three areas presenting the greatest security challenges were identified by Mark Beaudry, CPP in Security 2020. Which one is incorrect?

Standards and guidelines

Correct Incorrect Correct answer

Emerging Technologies

Correct Incorrect Correct answer

Security education

Correct Incorrect Correct answer

Departmental education for security professionals

Correct Incorrect Correct answer

The following three include a risk management strategy that takes full advantage of multiple security approaches. Which one is incorrect?

Behavior modification strategies

Correct Incorrect Correct answer

Electromechanical options

Correct Incorrect Correct answer

Personnel

Correct Incorrect Correct answer

Security risk assessments

Correct Incorrect Correct answer

Which of the following are generally the most expensive component of a security program, but also the most critical?

Locks

Correct Incorrect Correct answer

Facilities

Correct Incorrect Correct answer

Security personnels

Correct Incorrect Correct answer

Contractors

Correct Incorrect Correct answer

Which of the following abilities are required for the post of security?

Discriminating among events, personal circumstances or based on complex and varying criteria

Correct Incorrect Correct answer

Use physical force or the threat of digital force to transfer one or more person

Correct Incorrect Correct answer

Use patrol of buildings and perimeters

Correct Incorrect Correct answer

Emergency response

Correct Incorrect Correct answer

Logs and reports prepared by security officer have often been used in legal proceedings as an authoritative source to establish a variety of facts which include:

Precise time of an event occurred

Correct Incorrect Correct answer

Presence of material

Correct Incorrect Correct answer

Incident or event description

Correct Incorrect Correct answer

Emergency response

Correct Incorrect Correct answer

The following factors are important factors related to behavior. Which one is incorrect?

Courtesy

Correct Incorrect Correct answer

restraint

Correct Incorrect Correct answer

Interest

Correct Incorrect Correct answer

Strategy

Correct Incorrect Correct answer

There are three important concepts in training. When these elements (Education+ Training + Guiding Experience) are combined, the following one is created

Behavior

Correct Incorrect Correct answer

Development

Correct Incorrect Correct answer

Support

Correct Incorrect Correct answer

Emergency response

Correct Incorrect Correct answer

Which one of the following encompasses everything from equipment operation to defensive driving tactics to emergency response skills?

Cognitive learning

Correct Incorrect Correct answer

Affective learning

Correct Incorrect Correct answer

Psychomotor learning

Correct Incorrect Correct answer

parameter learning

Correct Incorrect Correct answer

Which of the following are the most important advantages of training?

Improved job performance

Correct Incorrect Correct answer

Hard of supervision

Correct Incorrect Correct answer

Urban protection

Correct Incorrect Correct answer

Local protection

Correct Incorrect Correct answer

BSIA stands for:

Basic Security Industry Association

Correct Incorrect Correct answer

British Security Industry Association

Correct Incorrect Correct answer

British System Institution Association

Correct Incorrect Correct answer

British Security Institutional Association

Correct Incorrect Correct answer

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question

26. Question

27. Question

28. Question

29. Question

30. Question

31. Question

32. Question

33. Question

34. Question

35. Question

36. Question

37. Question

38. Question

39. Question

40. Question

41. Question

42. Question

43. Question

44. Question

45. Question

46. Question

47. Question

48. Question

49. Question

50. Question

51. Question

52. Question

53. Question

54. Question

55. Question

56. Question

57. Question

58. Question

59. Question

60. Question

61. Question

62. Question

63. Question

64. Question

65. Question

66. Question

67. Question

68. Question

69. Question

70. Question

71. Question

72. Question

73. Question

74. Question